Search…
⌃K
Links

Release checklist

Lifecycle: Alpha. Last updated 2020-07-23

ESP32

Hotspot

Test
How to check
Pass / Fail
Checked by, date
Hotspot is active on first boot.
Check that there is hotspot "Ruuvi Gateway ABCD" Check that it is connectable with password "12345678"
Hotspot is deactivated on internet connection.
Connect gateway with Ethernet cable observe that hotspot is turned off.
Hotspot remains deactivated after internet connection.
Disconnect Ethernet cable, reboot.
Hotspot is reactivated on short button press.
Press button, connect to WiFi

Button

Test
How to check
Pass / Fail
Checked by, date
LED indicates button press.
Check LED on button press
LED indicates state Hotspot Active after short press.
Check LED after button press
On press < 5s configuration hotspot is activated, settings in flash remain
Configure custom settings. Press button briefly. Connect to hotspot, verify configured settings are shown.
On press > 5s configuration hotspot is activated, settings in flash remain
Configure custom settings. Hold button for 5+ s. Connect to hotspot, verify default settings are shown.

LED

Test
How to check
Pass / Fail
Checked by date
Hotspot active indication is activated.
Boot up unconfigured gateway.
Button press indication is activated on button press in configuration mode.
Press button when not connected to Internet
Connection ok indication is activated.
Connect Gateway with Ethernet Cable.
Button press indication is activated on button press in connected more.
Connect Gateway with Ethernet Cable, press button
Disconnection indication is activated.
Connect and disconnect Gateway with Ethernet Cable.
Button press indication is activated on button press in disconnected mode.
Connect and disconnect Gateway with Ethernet Cable, press button.
Last modified 2yr ago